MAGICMOTORSPORT
D.I.
-
TCU Manager
TCU Manager is a programmer capable of interfacing with the control units Exchange old vehicles and equipment. Supports OBD and Bootloader and provides the possibility to modify the parameters of the zone maps for competitions, both to clone the contents of memories in order to repair damaged power units. Standard : EC 1-2002 UNI EN ISO 3651-2:2000 CRC : MAGK00017 -
Drilling Kit ECU BMW EDC17CP41/45
This new tool for ecu bmw edc17cp41/45 aims to pierce the metal casing of the controller to be able to access the contact area for programming boot loader without having to dismount.the need arises from the fact that this type of control panels have a sticking from either side of the motherboard, and an eventual total opening might damage them irreparably.in the kit provides a special tip for use with a drill press that allows making a calibrated orifice that hangs in the headquarters of steel at the correct depth so as not to risk any damage to internal circuit. -
Universal Jig
This Template has spherical probes, which you can place at will according to the needs of the connections to make in the control unit. The template does not replace the classical MAGK00011 where wiring errors are highly unlikely thanks to specific adapters for each individual unit.it is a tool that complements the existing equipment, in particular is very useful to program new controllers who own multiple boot, so do not weld any thread or resistancePCB.through the support slot with 36 provides maximum contact options to anywhere in thecontrol unit to be programmed.in the kit are provided 6 contact points, but can be purchased individually for more complex work. Also the work is facilitated by the presence of a led that lights the work area bar. -
Magpro2 X 17
30: 3800, 00 2 Magpro2 X 17-modular solution for workshops and30: 2 MAGPro2 X 17 Chiptuning shops is a complete set of tools, accessories and services. X 17 supports engine control units and return of vehicles manufactured from 1998 until today. The system can be used to reprogram ECUs (thanks to the pairing works you can copy the entire contents of the original ECU on a second hand) is to manage differently the injection (in order to increase the power or reduce consumption).Team. CRC : MAGPro2 X17
customers are looked after by a team of multilingual engineers top notch, and the software is under constant update thanks to the Development Department. The online chat, instant messaging support (line, whatsapp), the ticket system (mms. care) and the database files and manuals are only a small part of the services offered by the